Beelink ME Pro 2-Bay

Beelink ME Pro 2-Bay

Intel N150 + 16GB LPDDR5 4800Mhz + 1TB SSD / US
$559.00
Skip to product information
Beelink ME Pro 2-Bay

Beelink ME Pro 2-Bay

$559.00
Configuration
Power Adapter

The Beelink ME Pro is a 2-bay NAS in a compact, all-metal unibody enclosure, roughly half the size of a typical 2-bay NAS. Its motherboard sits on a swappable, drawer-mounted slide-in tray, so you can pull it out to clean dust, service components, or eventually upgrade to a different Intel, AMD, or ARM board as Beelink releases them. It suits anyone who wants a NAS designed to be lived with for years, not replaced the moment the CPU inside feels dated.

Who it's for

  • Home users who want file serving and backups from a box that fits on a shelf or desk
  • Households streaming a media library to several rooms with Plex or Jellyfin transcoding
  • People who want tiered storage: large SATA drives for bulk archives plus fast M.2 SSDs for active projects or a cache tier
  • Homelab builders who want to run TrueNAS, Unraid, or Proxmox instead of relying on Windows file sharing

Key features

  • Ultra-compact all-metal unibody: At roughly half the size of a conventional 2-bay NAS, it fits on a shelf or desk, and the all-metal build keeps it rigid and well-shielded.
  • Swappable, drawer-mounted motherboard: The board slides out on a tool-less tray for dust cleaning and servicing, with Intel N-series boards shipping today and AMD and ARM board options planned for the future, so the chassis and drive bays are not tied to one CPU generation.
  • Intel N95 / N150 processor: Efficient Alder Lake-N / Twin Lake N-series silicon handles file serving, media transcoding, and light virtualization while using very little power around the clock.
  • Dual hot-swap 2.5″ / 3.5″ SATA bays: Two tool-less bays take 2.5″ and 3.5″ SATA drives, up to 30TB per drive, for large-capacity spinning storage or SSDs.
  • Triple M.2 NVMe expansion: Three additional M.2 2280 slots (one PCIe 3.0 x2, two PCIe 3.0 x1) add fast SSD storage or a cache tier alongside the SATA bays.
  • 5GbE + 2.5GbE dual networking: A 5Gbps port (Realtek RTL8126) and a 2.5Gbps port (Intel i226-V) give you wired throughput for simultaneous backups, media streaming, and remote access without saturating a single link.
  • Efficient blower-style cooling: Silicone thermal pads and an aluminum frame work with an internal blower fan to move heat away from the drives and the motherboard tray.
  • Quiet, vibration-dampened operation: Tight-fitting mounting screws reduce HDD vibration noise and dual-side silicone dampeners protect and quiet spinning drives, which matters in a unit this small, even with two spinning 3.5″ drives installed.

Specifications

Spec Detail
CPU Intel N95 or N150 processor
Motherboard Swappable, drawer-mounted tool-less design
Storage bays 2x hot-swap 2.5″/3.5″ SATA drive bays, up to 30TB per drive
M.2 expansion 3x M.2 2280 NVMe slots (1x PCIe 3.0 x2 + 2x PCIe 3.0 x1)
Memory LPDDR5 4800MHz, 12GB or 16GB configurations
Networking 5GbE (Realtek RTL8126) + 2.5GbE (Intel i226-V)
Wireless WiFi 6, Bluetooth 5.4
Ports USB-C (10Gbps), USB-A 3.2 Gen2 (10Gbps), 2x USB-A 2.0, HDMI, 3.5mm audio
Chassis All-metal unibody, roughly 50% smaller than typical 2-bay NAS units; approx. 166 x 121 x 112mm
Cooling Internal blower fan, aluminum frame, silicone thermal pads
Noise control Tight-fit mounting screws and dual-side silicone drive dampeners
Power External power adapter, wide-range AC input
Operating system Windows 11 Home pre-installed (TrueNAS/Unraid/Proxmox compatible)

Good to know

  • It ships running Windows 11 Home and is also compatible with TrueNAS, Unraid, and Proxmox.
  • AMD and ARM boards are on Beelink’s roadmap; the boards shipping today are Intel N95 or N150.

Choose the ME Pro if you want a small, quiet 2-bay NAS with 5GbE plus 2.5GbE networking and a motherboard you can service or swap later, rather than a fixed-CPU box you replace as a whole.

You may also like